PSM Lubrication

Two types of oil are recommended for the lubrication of Eadie PSM Rings.

The Mineral Oils recommended are the hydraulic type with additional properties to inhibit against wear, oxidation, corrosion and foaming. They should also have a high viscosity index.

The Synthetic Oils recommended for PSM rings are diester based. They are more expensive than mineral oils, but they provide high lubricity, good oxidation resistance and excellent thermal stability. Diester oils are miscible with mineral oils, and additives can be dissolved in them easily.

The following oils are recommended by Eadie for use with our rings:
 
Synthetic Oil

 

Manufacturer

Trade Name

 

Manufacturer

Trade Name

AGIP

0S0 32

MOBIL

DTE 24

BATOYLE

APOLLO 32

SHC 624

RINGSPIN 816 S

NIPPON OIL

SPINOX TX 32

BP OIL

ENERGOL HLP 32

NON FLUID OIL

RING OIL 1957

CASTROL

HYSPIN AWS 32

RING OIL 1507

ELF

POLYTELIS 32

SHELL

TELLUS 32

ESSO

TERESSO 32

STEPHENSON THOMPSON

SINTESOL

FINA

HYDRAN LZ 32

TEXACO

RANDO HD 32

GULF

HARMONY 32

TOTAL

AZOLLA ZS 32

ITALIAN PETROLI

HYDRUS 32

VADEN

KP No. 3

KLUBER LUBRICATION

TEX SYNTHESO M32

VICKERS

TRAVOL SR 32

SYNTHESO XOL 12

TRAVOL 8112

KUWAIT

HAYDN 32

TRAVOL SR32SE

MILLER OIL

MILLMAX 7 AW

ZELLER & GMELIN

TEXTOL DHG 32

TEXTOL RLS ISO 15

Physical Characteristics:  Mineral oils suitable for use with Eadie PSM Rings must meet the following criteria:

Characteristic Data

Test   Method

Properties

ISO 3448 Viscosity Grade     ISO Oil type

32

Relative Density (15/15°C)

IP 160   ASTM D1298

0.875 / 0.882

Kinematic Viscosity:    cSt @ 40° C / cSt @ 100°C

IP 71     ASTM D445

32   / 5.3

Viscosity Index

IP 226   ASTM D2270

95 minimum

Pour Point °C

IP 15     ASTM D97

-30

Flash Point  C.O.C.   °C

IP 36     ASTM D92

230

Neutralisation Value mg KOH/g (Acidity)

IP 139   ASTM D974

1.5 (< 0.15)

Foaming Tendency / Stability: ml @ 24° C / 93.5° C / 24° C (after test at @ 93.5° C)

IP 146   ASTMD892

20/Nil

Air Release Value (minutes to 0.2% air content at 50°C)

IP 313   DIN 51381

3

Seal Compatability Index

IP 278

10

Water separation time in minutes to 40 – 40 – 0: @54° C / 83° C

ASTM D1401

10

Oxidation Test

IP 157   ASTM D943

>1500

 

Latest News

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod .

Our blog
Eadie & Kanai

New Website Development